Cuprinol Cuprinol Ultimate Garden Wood Preserver - Autumn Brown - Wood Preserver

Features

• Colour name:Autumn Brown
• Product type:Paint
• Suitable for outdoor use:Yes
• Suitable for indoor use:No
• Best uses:Building, Decking, Fence, Furniture, Shed
• Composition:Water-based
• Opacity:Opaque
• Surface coverage (min):3 m²/L
• Surface coverage (max):5 m²/L
• Paint volume:1 L
• Volatile organic compounds (VOC) content:66 g/l
• Volatile organic compounds (VOC) content labelling system:Low (0.3 - 7.99%)
• Minimum drying time:2 h
• Maximum drying time:6 h
• Drying time note:Dependent on the nature of the surface and the weather conditions.
• Recoat after note:Allow the previous coat to soak in before applying the next.
• Number of coats:2
• Surface preparation:Surfaces should be dry and free from dirt and algae etc. remove any algae, lichen, fungi or moss using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. Not suitable for use on timber in ground contact situations.
• How to use:Application by brush: Apply a minimum of two even brush coats to give a uniform finish. Allow the previous coat to soak in before applying the next. Usually 2-6 hours under normal weather conditions. Please note that the type of wood and any previous treatment will affect colour. Try a representative test area first to ensure colour is acceptable when dry. Do not apply in temperatures or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Where a strong colour change is involve, more coats may be required. If using more than 1 pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. if a longer period elapses try a test area to ensure product is not repelled.
• How to store:Do not store or use in extreme temperatures and protect from frost
• Disposal & recycling:Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
• Tool cleaning:Clean up any spills while still wet. After use remove as much product as possible from equipment before cleaning with water

Packaging data

• Package width:115 mm
• Package depth:115 mm
• Package height:123 mm
• Package weight:1160 g